Field
Value
•
@3 9A
: Select a predefined group from the list.
The Advanced Settings menu consists of the following fields:
Fields in the Advanced Settings menu.
Field
Value
Policy
Select how your device is to react if a negative response to a re-
quest is received.
Possible values:
•
,3!
(default value): A negative response to a
request is accepted.
•
93!
: A negative response to a request is
not accepted. A request is sent to the next RADIUS server un-
til your device receives a response from a server configured
as authoritative.
UDP Port
Enter the UDP port to be used for RADIUS data.
RFC 2138 defines the default ports 1812 for authentication
(1645 in older RFCs) and 1813 for accounting (1646 in older
RFCs). You can obtain the port to be used from the documenta-
tion for your RADIUS server.
The default value is
.
Server Timeout
Enter the maximum wait time between ACCESS_REQUEST
and response in milliseconds.
After timeout, the request is repeated according to Retries or
the next configured RADIUS server is requested.
Possible values are whole numbers between
and
.
The default value is
(1 second).
Alive Check
Here you can activate a check of the accessibility of a RADIUS
server in Status
-2
.
An Alive Check is carried out regularly (every 20 seconds) by
sending an ACCESS_REQUEST to the IP address of the RADI-
US server. If the server is reachable, Status is set to
+
again. If the RADIUS server is only reachable over a
bintec elmeg GmbH
7 System Management
be.IP 4isdn
63
