Field
Description
fault value is
.
Maximum Number of
Dialup Retries
Enter the number of unsuccessful attempts to setup a connec-
tion before the interface is blocked.
Possible values are
to
.
The default value is
.
Authentication
Select the authentication protocol for this connection partner.
Select the authentication specified by your provider.
Possible values:
•
,
(default value): Only run PAP (PPP Password Authentic-
ation Protocol); the password is transferred unencrypted.
•
%>,
: Only run CHAP (PPP Challenge Handshake Authentic-
ation Protocol as per RFC 1994); password is transferred en-
crypted.
•
,5%>,
: Primarily run CHAP, otherwise PAP.
•
.%>,
: Only run MS-CHAP version 1 (PPP Microsoft
Challenge Handshake Authentication Protocol).
•
,5%>,5.%>,
: Primarily run CHAP, on denial then the
authentication protocol required by the connection partner.
(MSCHAP version 1 or 2 possible.)
•
.%>,
: Run MS-CHAP version 2 only.
•
9
: Some providers use no authentication. In this case, se-
lect this option.
DNS Negotiation
Select whether your device receives IP addresses for Primary
DNS Server and Secondary DNS Server from the connection
partner or sends these to the connection partner.
The function is enabled with
7+
.
The function is enabled by default.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is enabled with
7+
.
13 WAN
bintec elmeg GmbH
208
be.IP 4isdn
