Field
Description
Check Sequence (checksums).
•
9 :
(default value for Routed Protocols over ATM): Is
only displayed for Type =
?3 *+ ,).
.
Encapsulation with LLC/SNAP header, suitable for IP routing.
•
$$%
: only displayed for Type =
,).
.
Encapsulation with LLC header.
•
E% .3++6
(default value for PPP over ATM):
Bridged Ethernet without additional encapsulation (Null En-
capsulation) with Frame Check Sequence (checksums).
Fields in menu Ethernet over ATM Settings (appears only for Type = Ethernet over
ATM)
Field
Description
Default Ethernet for
PPPoE Interfaces
Only for Type =
! ,).
Select whether this Ethernet-over-ATM interface is to be used
for all PPPoE connections
The function is enabled with
7+
.
The function is disabled by default.
Address Mode
Only for Type =
! ,).
Select how an IP address is to be assigned to the interface.
Possible values:
•
*
(default value): The interface is assigned a static IP
address in IP Address / Netmask.
•
->%
: An IP address is assigned to the interface dynamically
via DHCP.
IP Address/Netmask
Only for Address Mode =
*
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interfaces. Add new entries
with Add.
MAC Address
Enter a MAC address for the internal router interface of ATM
bintec elmeg GmbH
13 WAN
be.IP 4isdn
225
