Field
Description
Possible values:
•
)3
: All IP packets are allowed through except for
those which are explicitly prohibited..
•
/3
(default value): Only those packets are transmit-
ted that can be attributed to a connection that has been initi-
ated from a trusted zone.
You can configure exceptions for the selected setting in the
on page 277 menu.
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
,
(default value): Your device is automatic-
ally assigned a temporarily valid IP address from the provider.
•
*
: You enter a static IP address.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
7+
.
The function is enabled by default.
Create NAT Policy
Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is enabled with
7+
.
The function is enabled by default.
Local IP Address
Only for IP Address Mode =
*
Assign an IP address from your LAN to the PPT interface, which
is to be used as your device's internal source address.
Route Entries
Only if IP Address Mode =
*
Define other routing entries for this PPTP partner.
Add new entries with Add.
bintec elmeg GmbH
13 WAN
be.IP 4isdn
211
