Field
Description
Possible values:
•
,3*
(default value): The IP address of the interface
over which the ping is sent is automatically entered as sender
address.
•
*1*
: Enter the desired IP address in the input field.
Status
Only for Event Type
)
Select whether Destination IP Address
?*!7+
must be
(default value) or
/*!7+
in order to initiate the opera-
tion.
Interval
Only for Event Type
)
Enter the time in Seconds after which a ping must be resent.
The default value is
seconds.
Trials
Only for Event Type
)
Enter the number of ping tests to be performed until Destina-
tion IP Address as
/*!7+
applies.
The default value is
.
Monitored Certificate
Only for Event Type
%1* $1
Select the certificate whose validity should be checked.
Remaining Validity
Only for Event Type
%1* $1
Indicate the remaining validity of the certificate in percentage.
Function Button Status
Only for Event Type
'3* &3
.
When creating the trigger the dropdown selection Function
Button Status allows you to choose which status of the func-
tion button activates or deactivates the trigger. If you set the
status to
:
, the trigger becomes active if the status of the func-
tion button is
,*
, and inactive, if the state of the function
button is
*
. If your set it to
:11
, the trigger becomes
active if the state of the function button is
*
, and inact-
ive if the state of the function button is
,*
. The current
bintec elmeg GmbH
17 Local Services
be.IP 4isdn
359
