Chapter 7 System Management
The System Management menu contains general system information and settings.
You see a system status overview. Global system parameters such as the system name,
date/time, passwords and licences are managed and the access and authentication meth-
ods are configured.
7.1 Status
If you log into the GUI, your device displays the status page in the Users view.
Here you can find links to the configuration assistants that will support you with an easy
configuration of the most important settings.
Moreover, you can carry out a Firmware Update. Click Update to start the process.
Note
Do not interrupt the Internet connection or the power supply.
After installation of the new system software, the system must be restarted.
In the Full Access and Expert views of your device, the status page displays the most
important system information.
You see an overview of the following data:
• System status
• Your device's activities: Resource utilisation, active sessions and tunnels
• Status and basic configuration of the LAN, WAN, ISDN, and ADSL interfaces
• Information on plugged add-on modules (if any)
You can customise the update interval of the status page by entering the desired period in
seconds as Automatic Refresh Interval and clicking on the Apply button.
Caution
Under Automatic Refresh Interval do not enter a value of less than
seconds, oth-
erwise the refresh interval of the screen will be too short to make further changes!
7 System Management
bintec elmeg GmbH
36
be.IP 4isdn
