Field
Description
• The hexadecimal notation of the 64 bit is converted to a bin-
ary notation.
• Bit no. 7 of the first 8 bit field is set to
.
Static Addresses
Independently of the automatic creation described under Gen-
eration Mode, you can manually specify the Host Identifier of
one or more IPv6 addresses with Add. Its predefined length is
. Start any entry with
44
.
The fields in the Advanced menu are part if the prefix information sent inside of Router Ad-
vertisements if Advertise is enabled. The menu Advanced consists of the following fields:
Fields in the Advanced IPv6 Settings menu
Field
Description
On Link Flag
Select whether the On-Link Flag (L-Flag) should be set. This al-
lows the host to enter the prefix from the prefix list.
The function is activated by selecting
)3
.
The function is enabled by default.
Autonomous Flag
Select whether the Autonomous Address Configuration Flag
(A-Flag) should be set. This allows the host to use the prefix
and the 64 bit interface ID, to derive its address.
The function is activated by selecting
)3
.
The function is enabled by default.
Preferred Lifetime
Enter a time period in seconds. During this time, addresses de-
rived from the prefix through SLAAC are preferred.
The default value is
seconds.
Valid Lifetime
Enter a time period in seconds, for which the prefix is valid.
The default value is
seconds.
Note
The value for the valid lifetime should be lower than the one
configured for the option Router Lifetime under Advanced
IPv6 Settings.
9 LAN
bintec elmeg GmbH
98
be.IP 4isdn
