Field
Description
Intra-cell Repeating
Select whether communication between the WLAN clients is to
be permitted within a radio cell.
The function is activated by selecting
7+
.
The function is enabled by default.
ARP Processing
Select whether the ARP processing function should be enabled.
The ARP data traffic is reduced in the network by the fact that
ARP broadcasts that have been converted to ARP unicasts are
forwarded to IP addresses that are known internally. Unicasts
are quicker and clients with an enabled power save function are
not addressed.
The function is activated by selecting
7+
.
The function is disabled by default.
Make sure that ARP processing cannot be applied together with
the MAC bridge function.
WMM
Select whether voice or video prioritisation via WMM (Wireless
Multimedia) is to be activated for the wireless network so that
optimum transmission quality is always achieved for time-critical
applications. Data prioritisation is supported in accordance with
DSCP (Differentiated Services Code Point) or IEEE802.1d.
The function is activated by selecting
7+
.
The function is enabled by default.
U-APSD
Select whether the Unscheduled Automatic Power Save Deliv-
ery (U-APSD) mode is to be enabled.
The function is activated by selecting
7+
.
The function is enabled by default.
IGMP Snooping
IGMP snooping reduces the data traffic and thus the network
load, as Multicast packets from the LAN are not forwarded. Only
those Multicast packets will be forwarded that are requested by
the respective clients. When you enable IGMP snooping, IGMP
snooping, therefore, provides the framework in which Multicast
is applied.
10 Wireless LAN Controller
bintec elmeg GmbH
126
be.IP 4isdn
