Field
Description
The function is enabled with
7+
.
The function is enabled by default.
Local IP Address
Only if IP Address Mode =
*
Enter the static IP address of the connection partner.
Route Entries
Only if IP Address Mode =
*
Define other routing entries for this connection partner.
Add new entries with Add.
•
? ,
: IP address of the destination host or
network.
•
9B
: Netmask for Remote IP Address If no entry is
made, your device uses a default netmask.
•
.*
: The lower the value, the higher the priority of the
route (range of values
...
). The default value is
.
Fields in the IPv6 Settings menu
Field
Description
IPv6
Select whether the selected PPPoE interface should use Inter-
net Protocol version 6 (IPv6) for data transmission.
The function is activated by selecting
7+
.
The function is disabled by default.
Security Policy
Select the security settings to be used with the interface.
Possible values:
•
/3
(default value): Only those packets are transmit-
ted that can be attributed to a connection that has been initi-
ated from a trusted zone.
We recommend you use this setting if you want to use IPv6
outside of your LAN.
•
)3
: All IP packets are allowed through except for those
which are explicitly prohibited.
13 WAN
bintec elmeg GmbH
204
be.IP 4isdn
