Field
Description
locate a virtual MAC address. The first 6 characters of the MAC
are preset (but can be changed).
If Use built-in is active, the predefined MAC address of the al-
located physical interface is used.
Use built-in is activated by default.
Fields in the Basic IPv4 Parameters menu.
Field
Description
Security Policy
Select the security settings to be used with the interface.
Possible values:
•
)3
(default value): All IP packets are allowed through
except for those which are explicitly prohibited..
•
/3
: Only those packets are transmitted that can be
attributed to a connection that has been initiated from a trus-
ted zone.
You can configure exceptions for the selected setting in the
on page 277 menu.
Address Mode
Select how an IP address is assigned to the interface.
Possible values:
•
*
(default value): The interface is assigned a static IP
address in IP Address / Netmask.
•
->%
: An IP address is assigned to the interface dynamically
via DHCP.
IP Address / Netmask
Only for Address Mode =
*
With Add, add a new address entry, enter the IP Address and
the corresponding Netmask of the virtual interface.
Fields in the Basic IPv6 Parameters menu.
Field
Description
IPv6
Select whether this interface should use Internet Protocol ver-
sion 6 (IPv6) for data transmission.
The function is activated by selecting
7+
.
bintec elmeg GmbH
9 LAN
be.IP 4isdn
93
