Field
Description
The function is disabled by default.
Security Policy
Only for IPv6 =
7+
Select the security settings to be used with the interface.
Possible values:
•
)3
(default value): All IP packets are allowed through
except for those which are explicitly prohibited.
We recommend you use this setting if you want to use IPv6
on your LAN.
•
/3
: Only those packets are transmitted that can be
attributed to a connection that has been initiated from a trus-
ted zone.
We recommend you use this setting if you want to use IPv6
outside of your LAN.
You can configure exceptions for the selected setting in the
on page 277 menu.
IPv6 Mode
Only for IPv6 =
7+
Select whether the interface is to be operated in host or in
router mode. Depending on your selection different parameters
are presented for you to configure.
Possible values:
•
?3 ") ?3 ,#
(default
value): Select whether Router Advertisements are to be sent
via the interface.
Using Router Advertisements the list of prefixes is propagated
and the router propagates itself as the standard gateway.
The function is activated by selecting
7+
.
The function is enabled by default.
•
>
: The interface is operated in host mode.
DHCP Server
Only for IPv6 =
7+
and IPv6 Mode =
?3
") ?3 ,#
9 LAN
bintec elmeg GmbH
94
be.IP 4isdn
