FlowStar2 LB 514
12. FlowStar² Controller Software
111
Parameter entry is only possible if the waste valve is activated in
the configuration of the FlowStar². After clicking on
the
configuration is finished. By clicking on
the dialog box will
be closed and the FlowStar² is configured properly. The Server
configuration will look like shown below, depending on the de-
vices used:
The possible different configurations (measuring cells, flow
rates etc.) are saved locally at the PC where the configura-
tion was done. This means a configuration might not be
available using specific client Servers setup structures
(server and server configuration done on different PCs. In
this case the configuration files (*.XFS) can be copied man-
ually
from
the
source
PC
(path C:\Program Data\flwctrl\data)
When working with CHROMELEON 6.x, two different panels are
available to control the instrument functions or to check data