Berner 413159, Instruction Manual

Page: 4 / 152

EN
IG = Innengewinde/female thread AG = Außengewinde/male thread
2. Use, function and maintenance
1. Select an adapter with the correct size and pins (A).
2. Connect the adapter to the magnetic holder on the tip of the pneumatic rewind tool.
3. Connect the pneumatic rewind tool to the air hose.
4. Press the pressure relief button and turn the lever to adjust the length.
5. Attach the pneumatic rewind tool to the brake calliper.
6. Press the pressure switch to fasten the tool between the brake calliper and brake piston (B).
7. Make sure that the tool is securely fastened to the brake calliper.
8. Press and hold the pressure switch and turn the lever to wind the brake piston back into the cylinder.
9. After the piston has been rewound into the correct position, press the relief button to detach the pneumatic
rewind tool from the brake calliper (C).
1. Technical data
Model Weight
Inner hose
diameter
Working
pressure
Max. pressure Air inlet Noise LpA
kg mm bar bar inch dB(A)
414274
1,5 10 6-8 10 1/4" AG 20
A B C