Berlin Heart EXCOR Adult, Instructions For Clinical Use, Page: 75 / 212

1015002x00
75
User Interface
en
7.1.2 Status Bar
The status bar is located in the lower portion of the user interface. It displays informa-
tion on the status of the driving unit and panel PC.
A
CTIVE ALARM
High-priority alarms: flashing red bell symbol, error shown along
with troubleshooting instructions. Only visible when a high-priority
alarm is being signaled.
Active medium-priority alarm: flashing yellow bell symbol, error
shown along with troubleshooting instructions. Only visible when
a medium-priority alarm is signaled and a high-priority alarm is
not present at the same time.
Active low-priority alarm: yellow bell symbol, error shown along
with troubleshooting instructions. Only visible when a low-priority
alarm is being signaled and no high- or medium-priority alarms
are active at the same time.
A
UDIO PAUSED
Temporarily mutes audible acoustic alarms. The duration of the
muting depends on the priority level of the alarm.
Symbol Significance
A
UDIO PAUSED
No audible acoustic alarms will be emitted for a period of time.
Once the alarm condition has been rectified, the symbol disap-
pears. If the alarm condition is still valid, the symbol Alarm will
appear again after the pause.
A
UDIO OFF
Display showing that the audible alarm is switched off.
C
HILD PROTECTION ON
Displays that child protection is active. If the child protection set-
ting is not active, no symbol will be displayed.
U
SER
Shows the user logged in [ M
EDICAL
, E
XPERT
, L
OCAL
]. If no user is
logged in, nothing will be shown.
P
ANEL
PC
DATA TRANSMISSION DISPLAY
Animated depiction of data transmission from the driving unit to
the panel PC. Only shown if data transmission takes longer than
three seconds.