1015002x00
63
Driving Unit
en
5.10.2 Replacing a Driving Unit in LVAD and RVAD Patients
5.10.2.1 Checking the Functionality of an Unconfigured Driving Unit and Panel PC
5.10.2.2 Configuring the Driving Unit from File
5.10.2.3 Checking Configuration and Starting the Driving Unit
1.
Have the panel PC and driving unit ready.
2.
Connect the panel PC to the mains and switch it on.
3.
Connect the driving unit to a power supply. Insert charged batteries. Establish
a mains power connection
4.
The driving unit will conduct a start test. During the start test, the driving tube
connectors must be closed.
5.
Connect the driving unit and panel PC with the USB cable.
6.
The panel PC will log into the driving unit automatically as user
E
XPERT
.
7.
Check the following items on the driving unit:
•
Did the start test run without errors?
•
Are the displays active?
•
Can an audible alarm be heard when the buttons are pressed?
8.
Check the following items on the panel PC:
•
Is a driving unit – panel PC connection in place?
•
Does the user interface respond when the buttons are pressed?
•
Is the user interface bright and easy to read?
9.
If errors occur, see chapter 17: Identifying Errors and Troubleshooting,
page 155.
1.
Initial state:
The configuration file can be found on the panel PC or on a USB
stick.
2.
If the configuration file is on the USB stick, then insert the USB stick into the
USB port on the panel PC.
3.
In the
C
ONFIGURE
DRIVING
UNIT
view, press the
F
ROM
FILE
tab.
4.
The available configuration files will be displayed.
5.
Select the configuration file for the patient, and confirm the selection.
1.
Switch to the Settings view.
2.
Carefully check the settings.
Summary of Contents for EXCOR Adult
