manualshive.com logo in svg

Berlin Heart EXCOR Adult, Instructions For Clinical Use, Page: 24 / 212

Share
Download
Berlin Heart EXCOR Adult Instructions For Clinical Use Download Page 24

24

1015002x00

General Information EXCOR Active

en

Medical waste

Dispose of explanted cannulae, used blood pumps, and contaminated disposable 
items in accordance with the valid local, state, and national laws and guidelines re-
garding medical waste.

3.10 Product Life

Reaching the intended product life for the components depends on proper use and ad-
herence to the specified inspection and maintenance intervals. See chapter 18: Main-
tenance, Cleaning and Disinfection, page 171 for more information.

Component

Product life in years

Driving unit

6

Battery

1

Power Supply Unit for Driving Unit and Battery 
Charging Unit

3

Panel PC including docking station and 
power supply unit

6

Flow sensor

6

Manual pump

6

Battery charging unit

6

Caddy

6

Accessory Bag

2

Baby buggy

6

Adapter for external alarm

6

USB cable

6

USB stick

6

Tab. 3-3

Product Life - Components

Summary of Contents for EXCOR Adult





















































































































































































































Reviews:

No comments