Berlin Heart EXCOR Adult, Instructions For Clinical Use, Page: 35 / 212

1015002x00
35
Driving Unit
en
Error view
Error messages are displayed on the Start screen. When the button is pressed, audi-
ble alarms are paused, and the
E
RROR
view is shown. The following appears:
If the driving unit is set to the non-verbal version, only the alarm code will be displayed.
Messages and instructions can be looked up in the short instructions.
If multiple errors occur simultaneously, use the button to page through all current er-
rors.
Flow Display view
Displays the current flow for the left and/or right blood pump.
Info view
Display showing the current driving parameters. The values apply to the correspond-
ing driving unit side.
• S : Driving pressure in systole [mmHg]
• D : Driving pressure in diastole [mmHg]
• R : Rate [bpm]
• % : Duration systole [%]
Fig. 5-8 Display of view – Error
1 Alarm paused
2 Display of current errors; error 1
of 2 is currently being displayed
3 Display of error codes and mes-
sage
Alarm code H2
Message Flow too low
Instructions >> Check driving tube, blood pump, and
cannulae
Fig. 5-9 Display of view – Flow; LVAD
1 Display of the current flow left in
[l/min]
2 Display of the current flow right in
[l/min]
1 2
3
1
2