Bennett HIGH FLOW H35, Instruction Manual

Page: 65 / 98

Programming
Bennett HF H35 Instruction Manual 61
STEP 3 – PULSE OUTPUT SPEED (PULSES PER SECOND)
The Pulse Output Speed (Pulses Per Second) identifies the time required to send one output pulse to the fleet system
to indicate sale progress. The shorter the pulse period, the greater the maximum flow rate for a selected pulse ratio.
The pulse period range is 10 pulses per second to 1000 pulses per second.
PULSE OUTPUT SPEED (PULSES PER SECOND) OPTIONS
•
1 – 1000 PPS (pulses per second)
• 2 – 500 PPS (pulses per second)
•
3 – 250 PPS (pulses per second)
•
4 – 125 PPS (pulses per second)
•
5 – 100 PPS (pulses per second)
•
6 – 50 PPS (pulses per second)
• 7 – 25 PPS (pulses per second)
•
8 – 10 PPS (pulses per second)
To select a pulse output speed (pulses per second) option in Menu Code 50, follow this procedure:
1. After Step 2 – Determine the pulse ratio has been selected. The main
display shows the Pulse Output Speed (pulses per second). The PPV
display shows the dispenser is in Menu Code 50.
If the dispenser has not been programmed since it came from the
factory, disabled appears in the main display. This is the default setting.
2. To change the setting, use the 1 through 8 buttons on the keypad to
enter a new option. The display will show dashes during a new
selection as shown in
Figure 50.5. Note : If an error is made, press the
correct number. The new number replaces the error.
3. When the desired pulse output speed (pulses per second) appears in
the main display, press the
Enter button to save your setting. The
dashes will disappear after a selection is made.
4. Press the Cancel button to exit this menu code.
PULSE PERIOD
(MILLISECONDS)
PULSES PER
SECOND
PULSES PER
MINUTE
MAXIMUM FLOW RATE AT
1000 PULSES/K
ILOGRAM
1 1000 60000 60 KG/MIN
2 500 30000 30 KG/MIN
3 250 15000 15 KG/MIN
10 100 6000 6 KG/MIN
20 50 3000 3 KG/MIN
100 10 600 0.6 KG/MIN
Figure 50.5 – Pulse Output Speed (PPS)
Sale $
- P O S p E E d -
Kilograms
- - 5 0 0 P P S - -
C O d e 6 6