Programming
Bennett HF H35 Instruction Manual
40
MENU CODE 5 - ENTER THE ELECTRONIC TOTALIZER VALUES
The dispenser can accumulate and store a value for the mass passing through the mechanical totalizer. A beginning value for the
electronic totalizer is required for a starting point (from the mechanical totalizers). Use this menu code to enter a new meter
total value. This value can be reset at any time.
NOTE: Mode 5 resettable mass totals are not the same as mode 29 resettable totalizers. Mode 5 totals are updated
every time the mode 1 mass totals are updated. Mode 29 totalizers are incremented every time data is sent to an
electromechanical totalizer.
PROCEDURE
If monthly, weekly, or daily totals are required, enter Menu Code 5 (press the
5
button and then the
Mode
button on the keypad) and zero the total by
pressing the
0
button until all meter totals are zero. At the end of the period
that has been selected for gathering totals, record the total value and zero
the totals again.
Menu Code 5 can be used to verify totals on the mechanical totalizer. If the
mechanical totalizer is disconnected for any reason or becomes inoperable,
Menu Code 5 will still record meter mass totals.
To enter a new value for the meter totals, follow this procedure:
Press the
5
button and then the [
MODE
] button on the keypad. A mass
amount appears in the sales/mass display. The
P1
stands for the Product one
electromechanical total. The
--1
stands for Side 1.
Use the
0
through
9
buttons on the keypad to enter the new meter mass
value from the mechanical totalizers. When the first new number is pressed
the mass displays zeros and begins rotating the new total into the display.
Press the [
ENTER
] button to save the new value
Press the [
CANCEL]
button to exit this Menu Code.
Figure 4.15
–
Mass Amount
Sale $
890
Kilograms
123456
P1 .5
-- 1
Summary of Contents for HIGH FLOW H35
