Bennett HIGH FLOW H35, Instruction Manual

Page: 35 / 98

Programming
Bennett HF H35 Instruction Manual 31
CHAPTER 4 PROGRAMMING
The dispenser has a variety of Menu Codes that are accessed by using the Manager’s Keypad . Menu Codes 0, 1, and 2 are accessed
by the attendant or the manager to read diagnostic error codes or totals. The remaining menu codes are used by first entering
an access code in Menu Code 3. Without the correct access code, the remaining Menu Codes are hidden. Please read the
description for each Menu Code for complete information on these options.
Menu
Code
Name Description Options
0 Diagnostics Diagnostic Tests Refer to the Diagnostic Section
1 Hose Totals Reading Money, Mass, Number of Sales, Number of Price Changes. N/A
2 View Totalizer Value Reading electro-mechanical totals only. N/A
3 Manager Access Entering a four-digit code to access remaining Menu Codes. 2218
4 Pricing Program to set price per mass for each hose and 1 or 2 tier pricing. N/A
5 Edit Totalizer Value Entering a value for each electro-mechanical totalizer (mass total). N/A
6 Programming Review programming selections or speed programming dispenser.
Menu Codes 7, 8, 9, 11, 13, 14, 15,
18, 21, 22, 28, and 16
7 Pump Type Program to set the dispenser type, tiers, hoses, and grades.
Type
▪
0 = None
▪
1 = Light Duty
▪
2 = Heavy Duty
▪
3 = Transit
BANKS
▪
0 = None
▪
1 = ON-FLY
▪
2 = PAUSE
▪
3 = direct
SIDE
▪
1 = 1 Side
▪
2 = 2 Sides
GRADES
▪
1 = 1 Grade
▪
2 = 2 Grades
HOSES
▪
1 = 1 Hose
▪
2 = 2 Hose
TIERS
▪
1 – 1 Tier
▪
2 = 2 Tiers
DETECTORS
▪
0 = None
▪
1 = Add2
▪
2 = Add3
8 Decimal Location Program to change decimal placement for other than U.S. standard.
There are seven decimal selections
available.
9 No Flow Time Out Program to set a time for the dispenser to turn off after flow stops. 0 - 99 Seconds or --- = Infinite Time
11 Mass Allocation Program to control maximum mass of a single sale at one pump. 0001 <= 9999