Programming
Bennett HF H35 Instruction Manual
53
PROGRAMMING PROCEDURE
1.
The first display shows the current electronic calibration correction
constant of the first configured. Use the
↑
(up arrow) button or the
↓
(down arrow) button to view the current electronic calibration
correction constant for each configured meter (product A or product
B). Once you are viewing the desired meter, press [
ENTER
].
2.
The main display now shows the direct percentage entry menu. Enter
the direct percentage value needed to calibrate the dispenser.
3.
As the new electronic calibration correction constant is entered, it will
show up in the main mass display. When the
Enter
button is pressed,
the entered electronic calibration correction constant is loaded into
the current meter and appears in the third PPM display.
4.
Now press the
↑
(up arrow) button to access the mass adjustment
menu
.
5.
Enter the mass adjustment value needed to calibrate the dispenser. As
the mass adjustment value is entered, it will show up in the main
display, press [
ENTER
] to save the value. When the
Enter
button is
pressed, the value appears in the third PPM display.
6.
Press the [
CANCEL
] button to return to the current electronic
calibration correction constant of the first configured meter.
7.
Press the [
CANCEL
] button to exit this Menu Code.
Figure 4.43
–
Current E-Cal
Figure 4.44
–
New E-Cal
Figure 4.45
–
Mass Adjustment Value
Summary of Contents for HIGH FLOW H35
