Bennett HIGH FLOW H35, Instruction Manual

Page: 51 / 98

Programming
Bennett HF H35 Instruction Manual 47
MENU CODE 13 – SELECT AUDIO TONE OPTIONS
The dispenser can be programmed to emit audio tones when certain buttons are pushed, or a pump handle is turned on. The
four options available are:
•
0 - No audio tones.
•
1 - Audio tone whenever a button on the keypad is pushed.
•
2 - Intermittent audio tone whenever an unauthorized pump handle is turned on. The tone stops when the dispenser
is authorized. This option also emits four audio tones at the beginning of a prepay sale.
•
3 – (Default) Combination of option 1 and 2.
PROCEDURE
1. Press the number 1 and 3 , then the [ MODE ] button on the keypad. The
price display shows the dispenser is in Menu Code 13.
2. If the dispenser has not been programmed since it came from the
factory, the number 3 appears in the main display. This is the default
setting.
3. To change the setting, use the 0 through 3 buttons on the keypad to
enter a new option. Note: If an error is made, press the correct number.
The new number replaces the error.
4. When the correct option number appears in the main display, press the
[
ENTER] button to save the selection.
5. Press the [ CANCEL ] button to exit this menu code.
Figure 4.30 Audio Tone
MENU CODE 14 – SELECT PPM DISPLAY OPTIONS
The PPM display can be programmed to operate several ways. This Menu Code programs the operation of the PPM displays.
NOTE: The default setting for all dispensers is Flash set at 1, Dash set at 0, Flip set at 0, and Digits is set at 1. This
setting allows the PPM displays to flash during the selection process and go blank when not selected.
DISPLAY OPTIONS PROGRAMMING SELECTIONS
Flash - PPM display for the Idle Hose
•
0 - The PPM displays are illuminated constantly in the idle mode.
•
1 - (Default) The PPM displays flash at 1-second intervals in the
idle mode.
Dash - PPM display for the Unselected Displays
•
0 - (Default) All unselected displays become blank after a hose is
selected.
•
1 – All unselected displays show dashes after a hose is selected.
Flip - Allows a two-tier price display to be inverted or flipped
between the cash and credit price displays. This option was
added to support various POS systems that display prices
opposite of a VeriFone Ruby.
Example : TMS MPC.
•
0 - (Default) The POS sends the credit price to the top display and
cash price to the bottom display.
•
1 - The POS sends the credit price to the bottom display and cash
to the top display requiring FLIP to be turned on.
Digit - Is used to program the dispenser for a four- or five-digit
PPM display.
•
0 - Four Digit Display
•
1 – (default) Five Digit Display
Note: If option 1 is accidentally selected for a five-digit display, on
a display only capable of four digits, the display characters will be
unreadable, and programming will be extremely difficult to perform.
Press the
Cancel button on the keypad several times until Side is
displayed. Press the +/- key five times to alternately program the digit
function to option 0 for a four-digit display.
Sale $
b E E p E r
Kilograms
3
C O d E 1 3