Bennett HIGH FLOW H35, Instruction Manual, Page: 69 / 98

Diagnostics
Bennett HF H35 Instruction Manual 65
0.1 DESIGN TYPE
The PPM display shows the dispenser is in Diagnostics Level 0.1 as shown in Figure
5.2 .
1. Design type 8 is standard for alternative fuel dispensers. It means the
dispenser is an “819 CPU design” computer.
2. Press Enter to move to the next level of Diagnostic Code 0.
0.2 SOFTWARE RELEASE NUMBER
The software release number is the current level of software installed in the dispenser. The PPM display shows the dispenser is
in Diagnostics Level 0.2.
1. After Enter was pressed in the previous level, the next level of Diagnostic
Code 0 is displayed.
2. The current level of software installed in the dispenser will be displayed
as shown in
Figure 5.3. Note: Software levels will change from version to
version.
3. Press Enter to move to the next level of Diagnostic Code 0.
4. Press the Cancel button to exit this code.
5. Press the Cancel button twice to exit Diagnostics.
0.3 819 SOFTWARE I.D. NUMBER
The software id number identifies the 819 software revision level installed in the dispenser. The PPM display shows the dispenser
is in Diagnostics Level 0.3.
1. After Enter was pressed in the previous level, the next level of Diagnostic
Code 0 is displayed.
2. The current level of the 819 software revision will be displayed as shown
in
Figure 5.4 . Note: This will change from software version to software
version.
3. Press Enter to move from one level to another of Diagnostics Code 0.
4. Press the Cancel button to exit this code.
5. Press the Cancel button twice to exit Diagnostics.
Sale $
d E s i g N
Kilograms
T y p E 8
d i a g 0 . 1
Figure 5.2 – Design Type
Sale $
s O f t
Kilograms
R E L 0 . 0 2
d i a g 0 . 2
Figure 5.3 – Software Release
Sale $
U E r 8 1 9
Kilograms
0 2 . 0 4 . 0 1
d i a g 0 . 3
Figure 5.4 – 819 Software ID