Bennett HIGH FLOW H35, Instruction Manual

Page: 81 / 98

Maintenance
Bennett HF H35 Instruction Manual 77
OTHER EQUIPMENT
ID # Dispenser Components Description Frequency Notes:
E1 Breakaway Devices
Inspect for signs of damage, corrosion,
partial separation, wetness, or
staining.
Monthly Replace every 3 years
E2
Filter - Bennet Purge Air
Supply Box
Verify that the filter is clean and dry. Monthly None
E3 Gas Detection Equipment
Visually inspect for damage. Run a test
and calibrate. Semi-
Annually
The gas detection system must
remain functional during
maintenance operations on
ventilation systems.
Refer to the OEM manual for
specific recommended calibration
periods.
E4 Hose and Hose Connections
Check for signs of damage (cuts,
cracks, bulges, blisters, flat spots,
kinks, leakage, or worn spots). Perform
a hose leak test.
Monthly
Replace any damaged hoses and/or
connectors.
E5 Nozzles
Check the flow rate from each nozzle.
Run a transaction from dispenser to
ensure to leakage at nozzle.
Monthly Replace every 3 years.