Bennett HIGH FLOW H35, Instruction Manual

Page: 43 / 98

Programming
Bennett HF H35 Instruction Manual 39
MENU CODE 4 - PROGRAM PRICE PER MASS
NOTE: Access code (Menu Code 3) must be entered into the pump and the PPM display must indicate dashes before
this mode may be entered.
NOTE: The PPMs reflected in these figures represent a setup with 2 Tier Pricing.
PROCEDURE
Press the 4 button and then the [ MODE ] button on the keypad. The individual
Price display for Product 1, Tier 1 flashes. The main display shows that Product
1, Tier 1 in Code 4 is active.
Use the 0 through 9 buttons on the keypad to enter the price for Product 1,
Tier 1.
When the first digit of the new price is entered. The main display will show
zeros and indicates the new digit in the right most digit. The PPM display
continues to flash the old price. When the correct price appears in main
display, press the [
ENTER ] button. The PPM display now contains the new
price. Note: If an error is made, press the 0 through 9 buttons on the keypad
until the correct price appears in the PPM display.
Repeat steps 2 and 3 for the remaining prices to be set. The dispenser only
displays the number of hoses selected in Menu Code 7.
Press the [ CANCEL ] button to exit this Menu Code.
Figure 4.12 – Program PPM
Figure 4.13 – Old Product Price
Figure 4.14 – New Product Price