Bennett HIGH FLOW H35, Instruction Manual, Page: 74 / 98

Diagnostics
Bennett HF H35 Instruction Manual 70
6.3 COLD START COUNTER
This code is used to tell the technician how many times a Cold Start has been
performed on the dispenser.
1. To enter this test, enter diagnostics and press the 6 button on the keypad
and the Enter button.
•
The main display shown in Figure 5.11a appears. The PPM display
shows the dispenser is in Diagnostics Level 6.3.
•
The number of Cold Starts that have occurred appears on the second
line of the main display.
2. Press the Cancel button to exit this test.
3. Press the Cancel button twice to exit Diagnostics.
6.4 EEPROM CHECKSUM FAILS
This code is used to tell the technician how many times the EEPROM checksum
failed on the dispenser.
1. To enter this test, enter diagnostics and press the 6 button on the keypad
and the Enter button.
•
The main display shown in Figure 5.11b appears. The PPM display
shows the dispenser is in Diagnostics Level 6.4.
•
The number of EEPROM Checksum fails that have occurred appears
on the second line of the main display.
2. Press the Cancel button to exit this test.
3. Press the Cancel button twice to exit Diagnostics.
6.5 SOFTWARE RESTARTS
This code is used to tell the technician how many times the software restarted on the dispenser.
1. To enter this test, enter diagnostics and press the 6 button on the keypad
and the Enter button.
•
The main display shown in Figure 5.11c appears. The PPM display
shows the dispenser is in Diagnostics Level 6.5.
•
The number of Software Restarts that have occurred appears on the
second line of the main display.
2. Press the Cancel button to exit this test.
3. Press the Cancel button twice to exit Diagnostics.
Sale $
c s t A r t
Kilograms
0
d i a g
6.3
Figure 5.11a – Cold Start Counter
Sale $
E E c h e c
Kilograms
0
diag 6.4
Figure 5.11b – EEPROM Cksum Fails Counter
Sale $
r s t A r t
Kilograms
0
d i a g
6.5
Figure 5.11c – Software Restarts Counter