Bennett HIGH FLOW H35, Instruction Manual

Page: 37 / 98

Programming
Bennett HF H35 Instruction Manual 33
RECOMMENDED DEFAULTS
Each new dispenser shipped from the factory is preprogrammed with customer specific “default” settings in some of the Menu
Codes. Use the recommended dispenser settings in the table below. Some menu codes must be changed immediately to make
the dispenser operational, refer to the Suggested Setup Sequence section the list of codes.
Menu Code Description Recommended Default Dispenser Settings
3 Managers Access 2218
7 Pump Type Type = 1 / Banks = 0 / Side = 1 / Grades = 1 / Hoses =1 / Tier =1 / Detect = 0
8 Decimal Location 1 = xxx.xx
9 No Flow Time Out 0 Seconds = Disabled
11 Mass Allocation 0999 Mass Units
12 Last Sale Timeout & Idle Timer Last Sale = 30 Seconds / Idle = 15 Seconds
13 Beeper Tone 3 = Combination of option 1 and 2 (Audio Tones)
14 Price Display (Flash, Dash, Flip) Flash = 1 (Enabled)
Dash = 0 (Disabled)
Flip = 0 (Disabled)
15 Fleet Option 1 = Enabled
18 Money Totals 0 = Cash Drawer Method
21 Communication Mode 0 = Current Loop
22 Dispenser Address / PLC Modbus
Address/ PLC Low Address Dispenser Address = 0
PLC Modbus ID = 1
PLC Low Address = 0
28 Rounding or Truncating Sale Amount 1 = Rounding the Sale Amount
44 Simulator Mode 0 = Off
50 Pulse Output 0 = Disabled
66 Nozzle Time Disabled