Bennett HIGH FLOW H35, Instruction Manual

Page: 36 / 98

Programming
Bennett HF H35 Instruction Manual 32
Menu
Code
Name Description Options
12 Last Sale & Idle Timer Program to set the last sale and idle timer.
Last Sale Timeout
▪
30 -90 Seconds
Idle Timer
▪
15-99 Seconds
13 Beeper Tone Program to set beeper tone options.
0 = No audio tones
1 = Audio Tone
2 = Intermittent Audio Tone
3 = Combination of option 1 and 2
14 Price display Program to set the way price displays operate.
0 = Disabled
1 = Enabled
15 Fleet Option Program to set the fleet system interface compatibility.
0 = Disabled
1 = Enabled
18 Money Totals Program to set the money totals calculation method.
0 = Disabled (Cash Drawer Method)
1 = Enabled (No Rounding)
21 Communication Type Program to set the dispenser in stand-alone or console modes.
0 = Bennett Current Loop
1 = Stand-Alone
2 = Bennett RS485 Retail
3 = Generic Current Loop
4 = RS-485 Fleet for Pulse Output
22 Dispenser Address / PLC
Modbus Address / PLC Low
Address Program to set the dispenser address, PLC address, and PLC low
address
Note: Site and Side Specific
Dispenser Address
▪
Current Loop = 0-3
▪
Generic Loop = 0-99
▪
RS485 = 0-99
PLC Modbus ID Address Range
▪
0-247
PLC Low Address
•
0
1
26 Shift Totals Program to reset shift totals
•
N/A
27 Electronic Calibration Direct Percent Entry Calibration N/A
28 Rounding Program to set either rounding or truncating the sale amount. 0 = Disabled (Truncating the Sale
Amount)
1 = Enabled (Rounding the Sale
Amount)
29 Resettable Totals Entering a value for each meter on the dispenser (mass total). N/A
30 Real Time Clock Entering the Real Time Clock N/A
44 Simulator Mode Program the dispenser to operate in simulator mode. 0 = Off
1 = PLC Pulse & Meter Simulation
2 = Meter Simulation (Pulses Only)
3 = PLC Simulation
49 RAM Clear Perform a RAM Clear on the equipment N/A
50 Pulse Output Pulse Unit, Pulse Ratio, and Pulse Speed (PPS) 0 = Disabled
66 Nozzle Time Program to set nozzle timeout 0-99 seconds
94 WM Timeout Program to set the Weights and Measures Timeout delay regulations. 15-999 seconds
99 View E-CAL View E-CAL Values. N/A