Bennett HIGH FLOW H35, Instruction Manual

Page: 73 / 98

Diagnostics
Bennett HF H35 Instruction Manual 69
DIAGNOSTIC’S CODE 6 – POWER FAILURE AND COLD START COUNTER
The power failure counter code is used to investigate intermittent problems with power. The counters keep track of the number
of times a power failure occurs.
6.1 POWER FAILURE COUNTER - PFAILS
1. To enter this test, enter diagnostics and press the 6 button on the keypad
and the Enter button.
a. The display shown in Figure 5.10a appears. The PPM display shows
the dispenser is in Diagnostics Level 6.1.
b. The number of power failures that have occurred since the system
was reset (cold start) appears on the second line of the main display.
2. The counter can be zeroed by pressing a sequence of keys while the
counter is displayed.
a. To zero the counter, press the following buttons on the keypad shown
in
Figure 5.10c in the sequence listed in step b.
b. Press ↑ , Press ↓ , Press +/- Note: After this three-button sequence is
entered, the counter displayed is cleared.
3. Press Enter to advance to the next counter or press the Cancel button to
exit this test.
4. Press the Cancel button twice to exit Diagnostics.
Sale $
P F A i l s
Kilograms
0
d i a g 6 . 1
Sale $
r u a r t f
Kilograms
0
d i a g
6.2
Figure 5.10a – Power Failure Counter
Figure 5.10b – Power Failure Counter
Figure 5.10c – Manager’s Keypad