BECKWITH ELECTRIC M-4272, Instruction Book

Page: 201 / 217

M-4272 Instruction Book
4–90
ISSLogic ® Function Setup
To setup an ISSLogic Function perform the following:
1. From the ISScom ® Main Screen menu
select System/Setup/Setpoints/ISSL .
ISSLogic will display the ISSLogic
Function dialog screen (Figure 4-93).
2. From the top right corner of the screen
select the desired ISSL tab, then select
Enable .
3. If desired select the Initiating Outputs
button. ISSLogic will display the Initiating
Outputs Selection screen (Figure 4-94).
a. Select the desired Initiating Outputs,
then select
OK .
b. Select the desired Initiating Output
Logic Function (AND/OR).
6. If desired select the Initiating Function
Timeout button. ISSLogic will display
the Initiating Function Timeout Selection
screen (Figure 4-95).
7. Select the desired Initiating Function
Timeout, then select
OK .
8. If desired select the Initiating Function
Pickup button. ISSLogic will display the
Initiating Function Pickup Selection
screen (Figure 4-96).
9. Select the desired Initiating Function
Pickup, then select
OK .
Figure 4-96 Selection Screen for Initiating
Function Pickup
Figure 4-95 Selection Screen for Initiating
Function Timeout
Figure 4-94 Selection Screen
for Initiating Outputs