manualshive.com logo in svg

BECKWITH ELECTRIC M-4272, Instruction Book

Share
Download
BECKWITH ELECTRIC M-4272 Instruction Book Download Page 75

1

3

A

B

C

M-4272 Instruction Book

3–4

File/Save and Save As Command

The Save and Save As... commands allow saving a
file or renaming a file, respectively.

File/Open Command

The open

 

command allows opening a previously

created data file. With an opened data file, use the
System...

 

Setup...

 

menu items to access the setpoint

windows.

If communication can be established with a MBTS,
it is always preferred to use the 

Read Data From

System

 command in the System menu to update

the PC’s data file with the MBTS data. This file now
contains the proper system type information,
eliminating the need to set the information manually.

File/Print and Print Setup Command

The Print

 

and Printer Setup commands allow user to

select printer options and print out setpoint data
from the open data file or directly from the MBTS, if
an MBTS is communicating with the PC.

File/Exit Command

The Exit

 

command quits the ISScom program.

Comm Menu

The Communication dialog screens allow selection
of the ISScom communication parameters to
coordinate with the MBTS. Selecting “Serial COM
Port” displays the PC Comm Port Settings section
(Figure 3-7). Selecting “TCP/IP” displays the PC
TCP/IP Settings section (Figure 3-8) for Ethernet
communication. Selecting “Modem”

 

displays an

expanded Communication Dialog screen (Figure 3-9),
to establish contact with remote locations. The
expanded Communication Dialog screen also
includes a “Bring up terminal window after dialing”
option. When selected ISScom will open a terminal
window to allow modem commands to be sent to the
target modem. When communicating by way of a
fiber optic loop network, echo cancelling is available
by checking the Echo Cancel box. This command
masks the sender’s returned echo.

If the modem was not used to establish
communication (direct connection), select 

Open COM

to start. If the MBTS has a default communication
access code of 9999, a message window will be
displayed showing Access Level #3 was granted.
Otherwise, another dialog screen will be displayed to
prompt the user to enter the access code in order to
establish communication. 

Close COM

 discontinues

communication.

File Menu

The 

File

 menu enables the user to create a new data

file, open a previously created data file, close, save,
save as, print preview, print and printer setup. The
ISScom

®

 program can also be exited through the

File

 menu.

File/New Command

When not connected to the MBTS, using the

 New

command, a new file is established with the New
System dialog screen (Figure 3-6). Selecting 

Save

allows the new data file to be named by using the

Save

 or 

Save As

... commands.

Q

Q

Q

Q

Q

 NOTE

: By choosing the 

NEW 

command, unit

and setpoint configuration values are
based on factory settings specified for
the profiled MBTS.

Path:

File menu / New command

Figure 3-6 New System Dialog Screen

COMMAND BUTTONS

SAVE

Saves the currently displayed
information.

Cancel

Returns to the ISScom main screen; any
changes to the displayed information
are lost.

Summary of Contents for M-4272


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands