manualshive.com logo in svg

BECKWITH ELECTRIC M-4272, Instruction Book

Share
Download
BECKWITH ELECTRIC M-4272 Instruction Book Download Page 197

M-4272 Instruction Book

4–86

Figure 4-91  TCM (Trip Circuit Monitor) Function Dialog Screen

The M-4272 TCM Function is comprised of two
elements; the trip coil circuit open detection circuit
element and the block all transfers element. The
trip coil circuit open detection circuit will illuminate
the alarm LED even when the M-4272 is not
physically connected to the trip coil circuit. When
the M-4272 is not connected to the trip coil circuit,
then the appropriate TCM alarm LED on the unit
front panel should be labeled as necessary to identify
the alarm as not valid.

With the M-4272 connected to the trip coil circuit
the TCM Function must be enabled in order for the
M-4272 to block all transfers.  If the M-4272 is not
connected to the trip coil circuit, there is no affect
on transfer operation.

Time Delay

 — A Time Delay can be applied to

delay the TCM (Trip Circuit Monitor) function output.

Dropout Time Delay

 — A Time Delay can be

applied to delay the reset of the TCM (Trip Circuit
Monitor) function output.

I/O Selection

 — The I/O Selection

 

button opens

the 

TCM (Trip Circuit Monitor)

 

I/O Selection Dialog

Screen (Figure 4-91)

 that allows any input or the

Fuse Loss (FL) function to be selected to block the

TCM (Trip Circuit Monitor)

. The TCM #1(2) Function

can also be used to activate a selected output when
it times out.

Save/Cancel

 — The Save selection saves the

TCM (trip Circuit Monitor)

 Function Dialog Screen

settings either to an open file or to the target MBTS.
Cancel, returns the user to the previous open screen.

Summary of Contents for M-4272


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands