BECKWITH ELECTRIC M-4272, Instruction Book

Page: 203 / 217

M-4272 Instruction Book
4–92
11. Select the desired Initiating System
Status selection(s), then select
OK .
12. Select the desired Logic Function (AND/
OR/NOR/NAND). The selected Logic
Function (AND/OR/NOR/NAND) will apply
only to the Initiating Function Timeout
Selection(s), Initiating Function Pickup
Selection(s) and Initiating System Status
Selection(s). The selected Logic
Function will ignore the functions and
System Status that are not selected.
13. If desired select the “Initiate via
Communication point”. Select Check Box.
14. If desired select Initiating Input button.
ISSLogic
® will display the Initiating Input
Selection screen (Figure 4-98).
15. Select the desired Initiating Input(s), then
select
OK .
16. Select the desired Initiating Inputs Logic
Function (AND/OR).
17. If desired select Blocking Inputs button.
ISSLogic will display the Blocking Inputs
Selection screen (Figure 4-99).
18. Select the desired Blocking Input(s), then
select
OK .
19. If desired select Block System Status
button. ISSLogic will display the Block
System Status Selection screen (Figure
4-100).
20. Select the desired Block System
Status(s), then select
OK .
21. Select the desired Blocking Inputs/Block
System Status Logic Function (AND/
OR). The selected Blocking Inputs/
Blocking System Status Logic Function
(AND/OR) will apply only to the selected
Blocking Input(s) and Blocking System
Status Selection(s); the selected Logic
Function will ignore the Inputs and
System Status that are not selected.
22. If desired select the “Block via
Communication point”. Select Check Box.
23. Select the desired Time Delay.
Figure 4-98 Selection Screen
for Initiating Inputs
Figure 4-99 Selection Screen
for Blocking Inputs