Using Model 5380 Ethernet and Model 5580 Token Ring Routers
D-14
112768 Rev. B
Module Number: 3
Connector: 1
Slot: 12
Circuit Name: O1231
IP address: 7.9.9.9
IP subnetwork mask: 255.0.0.0
Routing Protocol: RIP
Default Rt. Listen: No
TFTP Default Volume: 12:
FTP Default Volume: 12:
TI TELNET: Yes
NOTE: The Connector value in the above Configuration Summary
is the Connector number as seen on the 5580 Module.
Note, however, that within the event log and the MIB browsing
utilities such as Site Manager's Quick Get and the Technician
Interface's debug scripts, connectors are numbered by a
combination of their Connector number and Module number. The
interface you have selected will henceforth be referred to
as Connector 31
-------------------------------------------------------------------------------
Press [RETURN] to continue:
-------------------------------------------------------------------------------
Step 7. Specify a name for the configuration file.
Save configuration to a file.
-----------------------------
The Quick-Start configuration of the router is now complete and active.
Do you wish to save this configuration to a file? (y/n)[y]:
Default file name is startup.cfg on the current volume.
NOTE: Do *NOT* name this file 'config'. Later, you may wish to rename
this file 'config' after you perform a named boot and verify its
operation.
Enter file name [startup.cfg]:
-------------------------------------------------------------------------------
Step 8. Test this initial IP interface configuration.
TEST IP Interface
-----------------
IP Interface 7.9.9.9 is up.
Summary of Contents for 5380
