manualshive.com logo in svg

Bay Networks 5380, User Manual

Share
Download
Bay Networks 5380 User Manual Download Page 73

112768 Rev. B

3-1

 

Chapter 3

Initializing and Setting Up the Routers

To initialize the Model 5380 Ethernet Router or the Model 5580 Token Ring 
Router, you need to attach a terminal to the System 5000 chassis service port. This 
connection gives you access to the Technician Interface and the System 5000 
service port menus. The Technician Interface lets you set up the router and view 
the settings and statistics. The service port menus let you connect the router to the 
common management bus (CMB) that connects all modules installed in the hub to 
one another and to the supervisory module.

To configure protocols, start with Configuring Routers (router software) or 
Getting Started with Site Manager (BayStream software).

To manage the routers in a network, start with Using Site Manager Software 
(router software) or Getting Started with Site Manager (BayStream software).

To use the Technician Interface, refer to Using Technician Interface Software 
(router software) or Getting Started with the Technician Interface (BayStream 
software). 

Summary of Contents for 5380



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands