Bay Networks 5380, User Manual

Page: 75 / 146

Initializing and Setting Up the Routers
112768 Rev. B
3-3
Figure 3-1. Cabling the Model 5000 to a Terminal
Connecting a Router Module
After connecting a terminal to the service port, initialize each router module by
connecting it to the common management bus (CMB) in the System 5000 chassis
and making sure that it is recognized by the System 5000 supervisory module.
Then follow the procedure described later in “Preparing to Configure an Interface
for Network Management.”
To set up each of the four router interfaces on the router module, refer to “Setting
and Viewing Router Interfaces” later in this chapter.
To connect the router to the CMB and start the Technician Interface:
1.
Press [Enter].
Model 5000
TR00008A
COMM
20 mA PR KB
Service port