Using Model 5380 Ethernet and Model 5580 Token Ring Routers
3-8
112768 Rev. B
3.
Verify that the directory lists the installation files shown in Table 3-1, or
their equivalents.
4.
Verify that the directory contains the correct software image (s5000.exe).
If your installation files or software image is not available, contact the Bay
Networks Technical Response Center.
Booting with the
ti_5000.cfg File
You initialize the router with the ti_5000.cfg file. This file is a special file that
boots the router without configuration. You then run the installation script to
create an initial configuration. Never change the ti_5000.cfg file or overwrite it
with another configuration file.
Booting a new router uses the config file by default. When the router boots
through the boot command or is powered up, it uses the configuration file named
config and the image file named s5000.exe. When the router is shipped, the config
and ti_5000.cfg files contain the same information.
*. Other files may be in the directory.
Table 3-1.
Installation File Names
File name*
File Type
ti_5000.cfg
Initial configuration file
config
Configuration file
debug.al
Alias file
install.bat
Installation script file
s5000.exe
Router software image
s5000diag.exe
Router diagnostic PROM image
s5000boot.exe
Boot PROM image
Summary of Contents for 5380
