Bay Networks 5380, User Manual

Page: 119 / 146

Network Information Worksheet
112768 Rev. B
C-3
OSPF Configuration Information
OSPF Router IP Address. 192.32.156.7
OSPF Area Address. 0.0.0.0
Enable Simple Password Authentication? No
MTU size for OSPF packets (Default, Ethernet Size,
User-defined MTU). Default
OSPF interface type (Broadcast, NBMA, or Point-to-Point,
Point-to-Multipoint, Point-to-Multipoint [std]).
Note: Match the interface type. The interface type, the
Hello Interval, and the Dead Interval must match the
current OSPF configuration of the network.
Broadcast
Hello interval (in seconds). 10
Router Dead interval (in seconds). 40
Router priority. 1
Poll interval. 20
If you are configuring OSPF neighbors, what is the IP
address for each neighbor?
Note: Neighbors are defined only if the OSPF interface
type is NBMA.
(1) Not applicable.
(2) Sample
format:
192.32.156.8
192.32.156.9
Static Route to Site Manager Configuration Information
Destination network. 192.32.90.0
Destination network mask. 255.255.255.0
Next-hop address that is in the same subnet as the initial
IP interface. 192.32.4.99
Miscellaneous Information
Set SNMP Community Management? No
Default volume where TFTP transactions will take place. 2
Enable FTP? Yes
Default volume where FTP transactions will take place. 2
Enable Telnet? No
(continued)
Table C-1. Network Information Worksheet
(continued)
Requested Information Example Your Information