Baroness TDA1200, Service Manual

Page: 83 / 89

Remove the stop ring securing the rear
roller bracket.
1
3
2
4es8d4-002
Inspection of rear roller bracket Assy_002
1 Rear roller bracket
2 Bracket mounting board
3 Stop ring
Secure the rear roller bracket to the vise
and remove the bracket mounting board.
2
1
4es8d4-003
Inspection of rear roller bracket Assy_003
1 Bracket mounting board
2 Rear roller bracket
Remove the stop ring on both sides of the
bearing.
2
1
4es8d4-004
Inspection of rear roller bracket Assy_004
1 Stop ring
2 Bearing
2.
3.
4.
Remove the bearing by using a driver.
1
4es8d4-005
Inspection of rear roller bracket Assy_005
1 Driver
Important
Be sure to use a driver when driving in a
bearing.
Be sure to replace the bearing with new one.
Install the stop ring to the rear roller
bracket.
1
4es8d4-006
Inspection of rear roller bracket Assy_006
1 Stop ring
Turn the rear roller bracket upside down.
5.
6.
7.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-61
Inspection and repair of each section