Baroness TDA1200, Service Manual

Page: 68 / 89

Use a bearing puller to remove bearing
from drive shaft B.
Remove washers.
Next remove 2-shaft 14-tooth gear.
Remove bearing from drive shaft A with
bearing puller.
Remove 1-shaft 20-tooth, 22-tooth gear
and shifter fork together.
Remove 2-shaft 16-tooth gear.
2
1
3
5s6or7-037
Inspection of gear box_008
1 Bearing
2 3.2SPHC washers
3 14-tooth gear
Remove stop ring from drive shaft B.
1
2
5s6or7-038
Inspection of gear box_009
1 Drive shaft B
2 Stop ring
7.
[1]
[2]
[3]
[4]
[5]
[6]
8.
Remove oil seal from opposite side of
gearbox.
1
2
5s6or7-039
Inspection of gear box_010
1 Drive shaft A
2 Oil seal
Remove stop ring.
1
5s6or7-040
Inspection of gear box_011
1 Stop ring
From inside of gearbox remove stop ring
from drive shaft A.
2
1
5s6or7-041
Inspection of gear box_012
1 Drive shaft A
2 Stop ring
9.
10.
11.
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-46
Inspection and repair of each section