Baroness TDA1200, Service Manual

Page: 80 / 89

Place 1-shaft 20-tooth, 22-tooth gear on
work bench with the 22-tooth gear facing
up.
Position shifter fork between the 20-tooth
gear and 22-tooth gear.
Install 1-shaft 20-tooth, 22-tooth gear and
shifter fork onto drive shaft A together.
Check shifter fork positioning and make
sure that the 22-tooth gear is in front.
3
2
1
5s6or7-089
Inspection of gear box_062
2
1
3
5s6or7-090
Inspection of gear box_063
1 Shifter fork
2 1-shaft 20-tooth, 22-tooth gear
3 Drive shaft A
Slide 2-shaft 14-tooth gear onto drive shaft
B as pictured.
1
2
5s6or7-091
Inspection of gear box_064
58.
[1]
[2]
[3]
[4]
59.
1 2-shaft 14-tooth gear
2 Drive shaft B
Install 2 washers onto drive shaft B.
Now install bearing onto drive shaft B.
1
2
5s6or7-092
Inspection of gear box_065
1 Washers
2 Bearing
Install bearing onto drive shaft A.
Apply liquid gasket to both sides of
packing A. Position and attach to crank
gearbox B.
Apply the gear oil to the tip portion of the
shifter fork.
Check position of the shifter fork. Should
be in front position.
[The 22-tooth gear on drive shaft A
should be engaged with the 14-tooth
gear on drive shaft B.]
3
2
4
1
5s6or7-093
Inspection of gear box_066
1 Bearing
2 Drive shaft A
3 Packing A
4 Shifter fork
60.
[1]
[2]
61.
[1]
[2]
[3]
[4]
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-58
Inspection and repair of each section