Remove the spring box at the lowest point
in the following procedure:
1
m4y46a-001
Removal of spring box_002
1
Spring box
Remove the bolts and spring washers
from the tine holder.
1
2
3
mgo9ef-003
Removal of spring box_003
1
Tine holder
2
Spring box
3
Bolt and spring washer
Remove the nut and bolt from the box
mounting bracket and then remove the
spring box.
2
3
4
1
m4y46a-002
Removal of spring box_004
3.
[1]
[2]
1
Box mounting bracket
2
Nut
3
Bolt
4
Spring box
When removing the spring box after that,
attach the sling to the crank housing at the
highest point after setting the spring box to
be removed at the lowest point, and follow
the same procedure.
Installation of spring box
Caution
Refer to "Tightening torques" (Page 3-4) .
Note that the Baroness product warranty may
not apply to any defects caused by incorrect
or overtorque tightening, etc.
For installation, reverse the removing
procedure.
Crank Assy
Crank Assy layout
3
2
2
1
3
2
2
2
1
1
1
zilztg-001
Crank Assy layout_001
1
Slotted nut 20 and cotter pin for drive
shaft
2
Slotted nut 24 and cotter pin for crank
shaft
3
Crank Assy
4.
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-10
Removal and installation of each section
Summary of Contents for TDA1200
Page 1: ...Tractor Mounted Aerator Service Manual Serial No TDA1200 20004 TDA1600 20004 Ver 1 1...
Page 4: ...TDA1200 TDA1600 Contents...
Page 10: ...TDA1200 TDA1600 Safety Page 1 6 Safety Signs and Instruction Signs...
Page 22: ...TDA1200 TDA1600 Maintenance standards and maintenance Page 3 10 Greasing...
