Baroness TDA1200, Service Manual

Page: 61 / 89

Loosen the nut and remove the bolt.
Follow the same steps to remove the bolt
from the other side.
1
ogzg3t-002
Inspection of crank Assy_002
1 Bolt, nut, and spring washer
Remove the crank bracket by using a pulley
puller.
1
ogzg3t-003
Inspection of crank Assy_003
1 Crank bracket
Remove the slotted nut and disc spring.
Loosen the nut and remove the bolt.
Follow the same steps to remove the bolt
from the other side.
1
2
ogzg3t-004
Inspection of crank Assy_004
1 Slotted nut and disc spring
2 Bolt, nut, and spring washer
3.
4.
5.
6.
Open the angle between the crank bracket
and crank bracket A by using the crank
shaft as a fulcrum so that the angle
between them will become 180 °.
Remove the crank housing Assy by using a
pulley puller.
Remove the other crank housing Assys in
the same way.
4
2
1
3
ogzg3t-005
Inspection of crank Assy_005
1 Crank shaft
2 Crank bracket
3 Crank bracket A
4 Crank housing Assy
Remove the slotted nut and disc spring.
1
ogzg3t-006
Inspection of crank Assy_006
1 Slotted nut and disc spring
Place crank bracket A on the vise to
provide a space for the crank shaft to come
out.
7.
8.
9.
10.
11.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-39
Inspection and repair of each section