Baroness TDA1200, Service Manual

Page: 69 / 89

From opposite side tap out drive shaft A
and bearing with a plastic hammer.
1
5s6or7-042
Inspection of gear box_013
1 Drive shaft A
Next remove drive shaft A from inside of
gearbox.
Remove bearing from drive shaft A.
2
1
5s6or7-043
Inspection of gear box_014
1 Drive shaft A
2 Bearing
Re-insert drive shaft into original hole.
1
5s6or7-044
Inspection of gear box_015
1 Drive shaft A
12.
13.
[1]
[2]
14.
Remove bearing from gearbox using
drive shaft A. Tap on drive shaft in the
direction of the white arrow.
Remove drive shaft A from gearbox.
Remove bearing from drive shaft A.
1
5s6or7-045
Inspection of gear box_016
1 Bearing
Remove 6 bolts and S washers that attach
the crankshaft housing.
1
2
1
5s6or7-046
Inspection of gear box_017
1 Bolt, S washer
2 Crankshaft housing
15.
[1]
[2]
[3]
16.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-47
Inspection and repair of each section