Baroness TDA1200, Service Manual

Page: 20 / 89

Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
Greasing points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
1
2
2
3 5
6
4 6 4
8bq62b-213
Greasing points_001
Location
No. of
Greasing
Points
1 Rear roller 2
2 Front roller 2
3 Clutch 1
4 Journal cross 2
5 Safety cover 2
6 Slide (inner/outer tubes) 1
Rear roller
One location in each of the left and right side
of the rear roller.
8bq62b-214
Greasing points_002
Front roller
One location in each of the left and right side
of the front roller.
8bq62b-215
Greasing points_003
1.
2.
TDA1200
・
TDA1600
Maintenance standards and maintenance
Page 3-8
Greasing