Baroness TDA1200, Service Manual

Page: 28 / 89

Removal and installation of each
section
φ12.φ18 tine mounting board
Removal of φ12.φ18 tine mounting board
Warning
When removing or installing any crank parts,
be sure to secure the crank.
If the crank is not secured, the crank may
become unbalanced and rotate suddenly.
It may cause injury or death.
The machine is removed from the tractor
with its upper link, up-down handle, and
cover removed.
Remove the φ12.φ18 tine mounting board
from the tine holder.
1
2
gd7xfv-001
Removal of φ12.φ18 tine mounting board_001
1 Tine holder
2 φ12.φ18 tine mounting board
Turn the crank and place the tine holder
on a stage, so that the φ12.φ18 tine
mounting board can be removed from
that tine holder.
･
1.
2.
[1]
Install the socket on the spinner handle,
and remove the two bolts and the
φ12.φ18 tine mounting board.
1
2
3
4
gd7xfv-002
Removal of φ12.φ18 tine mounting board_002
1 Tine holder
2 Bolt and spring washer
3 φ12.φ18 tine mounting board
4 Stage
Remove the other φ12.φ18 tine mounting
boards in the same way.
1
2
gd7xfv-003
Removal of φ12.φ18 tine mounting board_003
1
The condition after the φ12.φ18 tine
mounting board is removed
2
The condition with the φ12.φ18 tine
mounting board installed
[2]
3.
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-6
Removal and installation of each section