Baroness TDA1200, Service Manual

Page: 67 / 89

1 Change lever
2 Shift fork
3 Compression spring A
4 Bolt, washers, U nut
5 Washers
6 Bolt, washers, U nut
Remove knock bolts and bolts. Next
remove change guide.
2
3
1
1
2
5s6or7-033
Inspection of gear box_004
1 Knock bolt
2 Bolt
3 Change guide
Pull out gearbox cover with the shifter
fork in the direction of the white arrow.
(It will stop at the high-speed side of
gear.)
Loosen nut and remove bolt.
Rotate the gearbox cover in the direction
of the black arrow (counter-clockwise)
and remove compression spring B and
steel ball.
Slide gearbox cover off of shifter fork to
remove.
1
2
3
5s6or7-034
Inspection of gear box_005
4.
5.
[1]
[2]
[3]
[4]
3 4 5
5s6or7-035
Inspection of gear box_006
1 Gearbox cover
2 Shifter fork
3 Bolt, nut
4 Compression spring B
5 Steel ball
Gears in the gearbox are composed of
these gears.
[1-shaft 20-tooth, 22- tooth gear, 2-shaft 14-
tooth gear, 2-shaft 16-tooth gear]
6
3
2
4
5
1
5s6or7-036
Inspection of gear box_007
1 Shifter fork
2 1-shaft 20-tooth, 22-tooth gear
3 2-shaft 14-tooth gear
4 2-shaft 16-tooth gear
5 Drive shaft A
6 Drive shaft B
6.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-45
Inspection and repair of each section