Baroness TDA1200, Service Manual

Page: 81 / 89

Match the spring holder on the gearbox
cover to the first groove on the shifter
fork.
Next install in order into the spring
holder. Steel ball, compression spring
followed by the bolt and nut.
1
3
2
5s6or7-094
Inspection of gear box_067
4 5 6
5s6or7-095
Inspection of gear box_068
1 Gearbox cover
2 Spring holder
3 Shifter fork
4 Bolt, nut
5 Compression spring
6 Steel ball
62.
[1]
[2]
Adjust the tension on the compression
spring and steel ball by tightening or
loosening the bolt. Suggested distance
between bolt head and nut (A) 6 - 8 mm.
Once proper tension and adjustment is
made, lock into position by fastening lock
nut.
1
A
5s6or7-096
Inspection of gear box_069
1 Bolt pushing compression spring
Align packing on crank gearbox B and
install gear box cover and change guide.
Secure into place with knock bolts, bolts
and S washers. Refer to picture or parts
catalog for placement of knock bolts and
bolts.
Tighten the bolts by the torque 29 - 38 N-m
(295.71 - 387.49 kgf-cm).
3
1
2
3
5s6or7-097
Inspection of gear box_070
1 Change guide
2 Knock bolt, S washer
3 Bolt, S washer
63.
[1]
[2]
64.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-59
Inspection and repair of each section