Baroness TDA1200, Service Manual

Page: 30 / 89

Remove the lower housing Assy set at the
lowest point in the following procedure:
1
mgo9ef-002
Removal of lower housing Assy_002
1 Lower housing Assy
Remove the bolt and spring washer from
the tine holder and then remove the
spring box.
1
2
3
mgo9ef-003
Removal of lower housing Assy_003
1 Tine holder
2 Spring box
3 Bolt and spring washer
3.
[1]
Caution
Nuts shall be tighten until locking is released.
Loosen the nuts of the bolts which are
connecting the crank housing with the
lower housing Assy.
1
2
3
mgo9ef-004
Removal of lower housing Assy_004
1 Crank housing
2 Bolt, washer, and nut
3 Lower housing Assy
Caution
Take a measure to prevent the lower housing
Assy from falling by using a rope for safety
because the Assy is heavy.
Remove the bolts, spring washers, and
nuts.
1
2
mgo9ef-005
Removal of lower housing Assy_005
1 Bolt, washer, and nut
2 Rope
[2]
[3]
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-8
Removal and installation of each section