Baroness TDA1200, Service Manual

Page: 75 / 89

Slide collar onto drive shaft B.
1
2
5s6or7-067
Inspection of gear box_040
1 Drive shaft B
2 Collar
Important
Drive in a spring pin so that its slit can face
the direction receiving force as shown.
1
2
5s6or7-068
Inspection of gear box_041
1 Slit of spring pin
2 Rotation direction of shaft
Align holes on collar and drive shaft B and
set with spring pin.
1
5s6or7-069
Inspection of gear box_042
1 Spring pin
37.
38.
Important
When hammering be mindful not to
damage bevel gear part of drive shaft B.
Please note depth allowance of vice or
base when hammering shaft into bearing.
Please tap drive shaft B into bearing with a
plastic hammer.
1
5s6or7-070
Inspection of gear box_043
1 Bearing
Apply the gear oil to the lip of the oil seal.
Apply liquid gasket or sealant to outer
side of oil seal.
Carefully position oil seal and tap flush
into the crankshaft housing with driving
tool.
3
2
1
5s6or7-071
Inspection of gear box_044
1 Crankshaft housing
2 Oil Seal
3 Driving tool
･
･
39.
40.
[1]
[2]
[3]
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-53
Inspection and repair of each section